Waterproof Access Card Reader
Narrow-bezel metal body, IP65 protection, reads IC card / ID card physical numbers, Wiegand/RS485 output, suited to outdoor or semi-outdoor access scenarios.
What it is
Overview
CR09 刷卡设备是专为门禁刷卡领域研发的产品，具备韦根与 RS485 两种输出接口，支持韦根 26/34 协议切换。设备采用壁挂式安装，适用于各类门禁刷卡前端场景，可作为读卡前端对接门禁控制器或上位机系统。
Highlights
双输出接口
支持韦根 / RS485 两种输出方式。
韦根协议切换
WG 引脚悬空为韦根 26，低电平为韦根 34。
PSAM 卡验证
支持 PSAM 卡认证。
多卡识别
识别 ISO 14443A/B 协议卡、身份证（仅物理卡号）；可读 UID、读写 M1 卡扇区、PSAM 认证。
NFC 模块操作
支持 M1 卡块读写、CPU 卡 APDU 指令，支持多块连续读写。
指示与提示
红光、绿光、白光、蓝灯及蜂鸣器，可通过协议控制。
壁挂式安装
外形更扁平，便于墙面安装。
Specifications
Performance Parameters
Environmental Parameters
产品详解与选型指南
Overview
The Waterproof Access Card Reader is CoolCode smart hardware for IoT access-control scenarios — narrow-bezel metal body, IP65 protection, reads IC card / ID card physical numbers, Wiegand/RS485 output, suited to outdoor or semi-outdoor access scenarios.
The CR09 card reader is a product developed for the access-card field, offering Wiegand and RS485 outputs with Wiegand 26/34 protocol switching. Wall-mounted, it suits various access-card front-end scenarios and works as a reader front end with an access controller or host system.
Key Features
Dual output
Supports Wiegand / RS485 output modes.
Wiegand switching
WG pin floating = Wiegand 26; low level = Wiegand 34.
PSAM authentication
Supports PSAM card authentication.
Multi-card recognition
Reads ISO 14443A/B cards and ID cards (physical number only); reads UID, M1 card sectors and PSAM authentication.
NFC module
Supports M1 block read/write and CPU card APDU commands, with multi-block continuous read/write.
Indicator & prompt
Red, green, white and blue LEDs plus a buzzer, controllable via protocol.
Wall-mounted
Flatter shape for easy wall mounting.
Key Specs
<5cm: actual distance depends on card spec
±15kV (air discharge), ±6kV (contact discharge): CR08 is ±8kV/±8kV
-20℃ ~ 70℃: same as CR08
-20℃ ~ 80℃: CR08 is -40℃~80℃
Use Cases
Waterproof Access Card Readers are common in outdoor access, factory gates, parking lots and turnstile readers, balancing high-concurrency and high-security passage and control needs.
Why CoolCode
Backed by in-house machine-vision and edge-cloud architecture, CoolCode products carry CE / FCC / ISO 9001 / RoHS certifications, are exported to 100+ countries and regions, and power scaled deployments in metro, campuses, government-enterprise and education.
Buying Guide
Choose based on the installation environment (indoor / semi-outdoor), recognition modality and concurrency, and contact CoolCode for project pricing and integration support.
What it solves
Use Cases
Certifications
FAQ
How much does the Waterproof Access Card Reader cost?
CoolCode Waterproof Access Card Reader is quoted per project based on model configuration, order volume and deployment scale. Use the buttons below to contact CoolCode for an official quote, solution design and samples.
What scenarios is the Waterproof Access Card Reader suitable for?
Waterproof Access Card Readers are common in outdoor access, factory gates, parking lots and turnstile readers, balancing high-concurrency and high-security passage and control needs.
What recognition modes does the Waterproof Access Card Reader support?
The Waterproof Access Card Reader delivers Dual output, Wiegand switching, PSAM authentication and Multi-card recognition, flexibly combining face / QR / IC card / NFC multimodal reading so one device covers many scenarios.
What are the key specs of the Waterproof Access Card Reader?
Typical Waterproof Access Card Reader specs: <5cm actual distance depends on card spec; ±15kV (air discharge), ±6kV (contact discharge) CR08 is ±8kV/±8kV; -20℃ ~ 70℃ same as CR08. Refer to the model datasheet for the full list.
How to deploy and integrate the Waterproof Access Card Reader?
Devices run online or offline, syncing permissions and access logs to the CoolCode cloud platform in real time; Wiegand / RS485 / RS232 / RJ45 / relay interfaces and an open API make integration with third-party access, turnstile and one-card systems straightforward.