Access Card Reader
Wiegand/RS485 dual-output interface with Wiegand 26/34 protocol switching; ultrasonic welding assembly, waterproof and dustproof IP65, suited to community and building RFID access readers.
What it is
Overview
CR08 刷卡设备是专为门禁刷卡领域研发的产品，具备韦根与 RS485 两种输出接口，支持韦根 26/34 协议切换。设备采用 86 盒方式安装，适用于各类门禁刷卡前端场景，可作为读卡前端对接门禁控制器或上位机系统。
Highlights
双输出接口
支持韦根 / RS485 两种输出方式，适配不同门禁系统。
韦根协议切换
WG 引脚悬空为韦根 26，低电平为韦根 34。
PSAM 卡验证
支持 PSAM 卡认证，满足高安全刷卡需求。
多卡识别
识别 ISO 14443A/B 协议卡、身份证（仅物理卡号）；可读 UID、读写 M1 卡扇区、PSAM 认证。
NFC 模块操作
支持 M1 卡块读写、CPU 卡 APDU 指令，支持多块连续读写。
指示与提示
红光、绿光、白光、蓝灯及蜂鸣器，可通过协议控制 LED 与蜂鸣器动作。
嵌入式安装
86 盒方式安装，外形紧凑。
Specifications
Performance Parameters
产品详解与选型指南
Overview
The Access Card Reader is CoolCode smart hardware for IoT access-control scenarios — Wiegand/RS485 dual-output interface with Wiegand 26/34 protocol switching; ultrasonic welding assembly, waterproof and dustproof IP65, suited to community and building RFID access readers.
The CR08 card reader is a product developed for the access-card field, offering Wiegand and RS485 outputs with Wiegand 26/34 protocol switching. Installed in an 86-box style, it suits various access-card front-end scenarios and works as a reader front end with an access controller or host system.
Key Features
Dual output
Supports Wiegand / RS485 output modes, adapting to different access systems.
Wiegand switching
WG pin floating = Wiegand 26; low level = Wiegand 34.
PSAM authentication
Supports PSAM card authentication for high-security card use.
Multi-card recognition
Reads ISO 14443A/B cards and ID cards (physical number only); reads UID, M1 card sectors and PSAM authentication.
NFC module
Supports M1 block read/write and CPU card APDU commands, with multi-block continuous read/write.
Indicator & prompt
Red, green, white and blue LEDs plus a buzzer, controllable via protocol for LED and buzzer actions.
Embedded install
86-box mounting, compact form factor.
Key Specs
<5cm: actual distance depends on card spec
Use Cases
Access Card Readers are common in community access, building readers, legacy upgrades and outdoor turnstiles, balancing high-concurrency and high-security passage and control needs.
Why CoolCode
Backed by in-house machine-vision and edge-cloud architecture, CoolCode products carry CE / FCC / ISO 9001 / RoHS certifications, are exported to 100+ countries and regions, and power scaled deployments in metro, campuses, government-enterprise and education.
Buying Guide
Choose based on the installation environment (indoor / semi-outdoor), recognition modality and concurrency, and contact CoolCode for project pricing and integration support.
What it solves
Use Cases
Certifications
FAQ
How much does the Access Card Reader cost?
CoolCode Access Card Reader is quoted per project based on model configuration, order volume and deployment scale. Use the buttons below to contact CoolCode for an official quote, solution design and samples.
What scenarios is the Access Card Reader suitable for?
Access Card Readers are common in community access, building readers, legacy upgrades and outdoor turnstiles, balancing high-concurrency and high-security passage and control needs.
What recognition modes does the Access Card Reader support?
The Access Card Reader delivers Dual output, Wiegand switching, PSAM authentication and Multi-card recognition, flexibly combining face / QR / IC card / NFC multimodal reading so one device covers many scenarios.
What are the key specs of the Access Card Reader?
Typical Access Card Reader specs: <5cm actual distance depends on card spec. Refer to the model datasheet for the full list.
How to deploy and integrate the Access Card Reader?
Devices run online or offline, syncing permissions and access logs to the CoolCode cloud platform in real time; Wiegand / RS485 / RS232 / RJ45 / relay interfaces and an open API make integration with third-party access, turnstile and one-card systems straightforward.