KG300扫码

Thank you for using the KG300 switch device. Reading this document carefully will help you understand the device functions and features, and quickly master its use and installation.

Product Introduction The KG300 is a switch product developed for access control, providing a relay interface and supporting delay settings.

Product Features 1, Relay signal output. 2, Open-delay setting. 3, Button status LED. 4, White/black/gold color options. 5, Capacitive touch switch with tempered-glass panel, premium look.

Overview; front view; delay DIP switch: 1=3s, 2=6s, 3=9s (only one at a time). 1 touch area, 2 white standby LED, 3 green key LED.

Dimension Drawing

Switch mode capacitive; touch area Ø15mm; size 88.2×88.2×28.7mm; switch time realtime/3/6/9s; interface relay, data cable PH2.0-6Y; LED white/green; current 12V (0.027A, rated 12–24V); 86-box mount.

Pin1 GPIO (reserved), Pin2 COM, Pin3 NC, Pin4 NO, Pin5 VCC, Pin6 GND.

The CMOS image sensor window must avoid direct sun or strong light. Tempered glass is durable but avoid harder scratches. The RFID antenna is under the window; keep metal/magnetic material 10cm away.

Scenario diagram; access-system wiring: magnetic lock, KG300 switch, access power, access scanner.

1, Powered 12–24V (from access power or standalone); over-voltage damages the device. 2, Do not disassemble. 3, Wiring must be firm and insulated to prevent short circuits. 4, KG300 outputs a relay signal; wire it as NO or NC into the existing access system.